Consumer Product Safety Commission
Scuba Diving/Water Activity Equipment
Scuba Diving/Water Activity Equipment
60 recalls filed under Scuba Diving/Water Activity Equipment.
-
Coleman Recalls Inflatable Rubber River Tubes Due to Skin Irritation Hazard; Sold Exclusively at Walmart
Contact with the tube can cause skin irritation.
-
Cabrinha Recalls Kiteboarding Control System Due to Risk of Injury
The Recoil™ spring on the control mechanism can jam, leading to a loss of control, which poses a risk of injury.
-
Attwood Recalls Kayak and Watersports Storage Hanger Due to Injury Hazard
The length adjustment buckles release unexpectedly, causing the item being stored to fall and injure people nearby
-
Suunto Recalls Air Hoses Used With Scuba Gear Due To Drowning Hazard
The high-pressure air hose may leak or rupture leading to a loss of breathing gas posing a drowning hazard.
-
Cabrinha Kiteboarding Recalls H2 Binding Due to Risk of Injury
The binding can detach from its base while riding and lead to loss of control, which poses a risk of injury.
-
High-Pressure Scuba Diving Air Hoses Recalled by A-Plus Marine Due to Drowning Hazard
The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the available air supply to the diver, posing a drowning hazard.
-
Diving Unlimited International Recalls Weight Systems Due to Drowning Hazard
Manufacturing defects in the lanyard connecting the handle to the pocket or the cable securing the pocket to the harness can prevent the weight pockets from easily detaching from the harness and releasing the weights when the handle is pulled. This poses a drowning hazard to consumers.
-
Aqua Lung America Recalls Apeks WTX Power Inflators Due to Drowning Hazard
The oral inflator button is not properly bonded to the oral stem and can fall off during use, posing a leak of the buoyancy compensator contents. This poses a drowning hazard.
-
Scuba Diving Buoyancy Compensators Recalled by Ocean Management Systems Due to Drowning Hazard
The buoyancy compensator seal ring could crack, posing a drowning hazard to divers.
-
Dive Computers Recalled by Mares Due to Drowning Hazard
An O-ring in the high pressure air connector can fail and leak air, causing a continuous but slow loss of breathing gas, which could require a diver to surface quickly, posing a drowning hazard to divers.
-
Tabata USA Recalls Scuba Regulators Due to Drowning Hazard
The first stage balance chamber plug can loosen from the scuba regulator causing a high-pressure leak and creating unstable pressure. This poses a drowning hazard to divers.
-
Scuba Regulators Recalled by Cressi Due to Risk of Drowning
Partial obstruction of the High Pressure (HP) port can produce an inaccurate reading on the pressure gauge, resulting in a slow descent of the needle in the pressure gauge. The inaccurate reading on the gauge poses a drowning hazard to divers.
-
Diving Equipment Recalled by Dive Rite Due to Drowning Hazard
The overpressure valve springs in the diving equipment could rust and fail allowing the buoyancy compensator devices to leak, posing a drowning hazard to divers.
-
SI Tech Recalls Diving Suit Hoses Due to Drowning Hazard; One Death Reported
The hose contains an insert that can dislodge during diving and restrict air flow to the diver, posing a drowning hazard.
-
Guardian Full-Face Diving Masks Recalled by Ocean Technology Due to Visor Separation Hazard
The plastic portion of the step can break, posing a fall hazard to the user.
-
Diving Equipment Recalled by Halcyon Manufacturing Due to Drowning Hazard
The over pressure valves (OPVs) in the diving equipment could fail allowing the buoyancy compensator devices (BCDs) and the diver lift inflatable devices to leak, posing a drowning hazard to divers.
-
Diving Wings With Defective Inner Bladders Recalled by Poseidon Due to Drowning Hazard
The inner bladder located inside the diving wing can break, causing the wing to fail to operate as a floating/buoyancy device. This poses a drowning hazard to divers.
-
Silent Diving Systems Recalls Scuba Diving Hoses Due to Drowning Hazard
Diving hoses may have been made without crimps, which can allow gas to leak or water to enter into the re-breather unit of the scuba diving equipment, posing a drowning hazard to the user.
-
Brownie's Third Lung Recalls Air Compressors Due to Drowning Hazard
The air compressor's components can fail, which could cause a stoppage of air flow. This poses a risk of drowning to users.
-
Aqua Lung Recalls Apeks Scuba Diving Regulators Due to Drowning Hazard
These regulators can be missing the diaphragm cover, which can cause the diaphragm to become displaced during a dive, allowing water to enter the scuba regulator. This poses a drowning hazard to divers.
-
Aqua Lung Recalls Scuba Regulators and Adapters Due to Drowning Hazard
Over-tightening of the DIN retainer by a technician during installation can result in the retainer breaking under pressure, a rapid escape of air from the scuba cylinder, and the regulator detaching from the scuba cylinder. This poses a drowning hazard to divers.
-
ROMI Recalls SCUBA Regulators Due to Drowning Hazard
An internal component that seals air between the high pressure first-stage and the intermediate pressure second-stage can fail. This can result in uncontrolled flow of air to the diver and pose a risk of serious injury or death.
-
M&J Engineering Recalls Swivels for Scuba Diving Masks Due to Drowning Hazard
The swivel, which is attached to a diving mask, could separate while diving. This will result in a sudden loss of the diver's air supply, causing the diver to engage in emergency ascent. This poses a risk of decompression sickness due to rapid ascent or drowning.
-
Innovative Scuba Concepts Recalls Diving Regulator Components Due to Drowning Hazard
The swivel, which is attached to a diving regulator, could separate while diving. This will result in a complete and sudden loss of the diver's air supply, causing the diver to engage in emergency ascent procedures. This poses a risk of decompression sickness due to rapid ascent, and air embolism or drowning if the diver panics or the emergency ascent procedure fails.
-
Kayak Paddle Floats Recalled by NRS Due to Drowning Hazard
The plastic tubes used to inflate the paddle float could break and deflate, posing a drowning hazard to consumers.
-
Pelagic Recalls Digital Dive Computers Due to Decompression Hazard
When performing a switch from one gas to another during a dive, the dive computer's display will lock up and not return to the main dive screen that displays dive times. This can cause divers to enter decompression unknowingly or the diver could ascend prematurely, resulting in decompression sickness.
-
Scubapro® Recalls MK 20 Scuba Regulators for Service
Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
-
Safety Alert: NRS and LL Bean Inflatable Water Boards Lack Safety Warning Labels
The safety warning label containing precautionary information on proper use and operation was not affixed to the device. The safety warning label should read: "CAUTION: This is not a lifesaving device. Never leave children unattended in or near water"
-
Suunto Dive Computers Recalled Due to Decompression Hazard
These dive computers could incorrectly track dive time, which could cause incorrect calculation of decompression requirements. This could lead to decompression sickness.
-
Sportsstuff Wego Kite Tubes Withdrawn from Market after Reports of Deaths and Injuries
A rider in the tube can become airborne, by pulling on handles attached to the floor of the tube. That could result in serious injuries.
-
Oceanic Recalls Digital Dive Computer Due to Decompression Hazard
When using the dive computer set for "User Selected Digital Gauge Mode," the "Elapsed Dive Time" displayed can exceed the actual elapsed time under water. This can cause divers to ascend before fulfilling a decompression obligation, resulting in decompression sickness.
-
Scubapro® X650 Diving Regulators Recalled for Drowning Hazard
A manufacturing error could cause the main housing of some regulators to change shape over time, which could cause the cover and diaphragm to become dislodged. If this occurs, air flow will be interrupted and the regulators will no longer function, posing a drowning hazard to users.
-
CPSC, Aqua Scout Announce Recall of Aqua Scout Water Scooters
Hydrogen gas can build up in the battery compartment and cause the battery cover and the battery package to forcefully expel from the product, posing a risk of injury to the user or bystanders.
-
CPSC, CSK Auto Announce Recall of Aqua Water Scooters
Hydrogen gas can build up in the battery compartment and cause the battery cover and the battery package to forcefully expel from the product, posing a risk of injury to the user or bystanders.
-
CPSC, Cressi-Sub Announce Recall of SCUBA Buoyancy Compensators
A slow leak from the shoulder exhaust caused by expansion of an internal cable housing could result in slow deflation. This could impact the diver's ability to control buoyancy.
-
CPSC, Head USA Inc. Announce Recall of SCUBA Diving Computers
The dive computers were improperly calibrated, resulting in incorrect calculations. Diving with an improperly calibrated dive computer can provide inaccurate "No Decompression (no stop) Time," "Decompression Time," "Desaturation Time" and "No Fly Time." This could result in divers suffering serious injuries, including decompression sickness.
-
CPSC, SCUBAPRO Announce Recall of Converter Kit
An insufficient bond may cause a break in the converter coupling, which could impact the diver's ability to control buoyancy.
-
CPSC, Ocean Management Systems Announce Recall of SCUBA Manifolds
Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.
-
CPSC, Halcyon Manufacturing Announce Recall of SCUBA BC Inflators
The SCUBA BC bladder can have a slow leak because of imperfections within the machining of the stainless air barrel of their inflators. This can cause unexpected buoyancy problems with divers, possibly resulting in decompression sickness.
-
CPSC, Pelagic Pressure Systems Announce Recall of SCUBA BC Inflators
Inflator buttons can stick, which can cause uncontrolled inflation of the BC. This could cause divers to ascend too fast, resulting in decompression sickness as well as the danger of an embolism.
-
CPSC, UWATEC Announce Recall of Smart Dive Computers
The computer's alert signal system may not work properly and the computer screen may freeze. This may cause inaccurate information to be displayed, such as water depth, tank pressure, and ascent rate, posing a risk to the safety of a diver.
-
CPSC, UWATEC AG Announce Recall of 1995 Aladin Air X NitrOx Dive Computers
Software in the dive computers may inaccurately calculate desaturation times, resulting in possible decompression sickness under aggressive dive conditions.
-
CPSC, Oceanic USA Announce Recall of Scuba Regulators
Extreme vibration can occur within these CDX regulators, which can cause an air leakage underwater. Divers could run out of air and drown.
-
CPSC, Johnson Outdoors Inc. Announce Recall of SCUBAPRO/UWATEC™ Dive Computer Consoles
The U-Line™ submersible pressure gauge that is part of the dive consoles can malfunction and display inaccurate pressure readings. Divers using the consoles could fail to decompress properly during a dive, causing decompression sickness.
-
CPSC, Sherwood SCUBA LLC Announce Recall of Maximus Regulators
The second stage orifices on these regulators can be cracked, bent or broken. This can result in a loss of breathing air underwater.
-
CPSC, Custom Buoyancy Inc. Announce Recall of Scuba Diving Devices
The overpressure valve can stick in the open position, posing a drowning hazard to divers.
-
CPSC, Diving Unlimited International Inc. Announce Recall of Scuba Diving Devices
The overpressure valve can stick in the open position, posing a drowning hazard to divers.
-
CPSC, Sheico PKS Inc. Announce Recall of Scuba Buoyancy Compensator Devices (BCDs)
The overpressure valve can stick in the open position, presenting a drowning hazard to divers.
-
CPSC, Atomic Aquatics Announce Recall of Scuba Regulators
The regulator's first stage spring can break, causing restricted airflow, posing a drowning hazard to consumers.
-
Scuba Buoyancy Compensator Devices (BCDs) Recalled by Durapro Systems
Drowning
-
Guardian Dive Computers Recalled by Mares America
Internal Injury
-
Dive Masks Recall by Kmart
Laceration
-
G500 Second Stage Regulators Recalled
Drowning
-
CPSC, Trelleborg Viking Announce Recall Of Air Inlet Hose
Internal Injury
-
CPSC, Trident Announce Recall Of Scuba Diving Tank Valve Caps
Explosion/Projectiles
-
Dry Suit AC Valve Recalled by DUI
Internal Injury
-
Scuba Regulators Recalled by Under Sea
Drowning
-
Scuba Regulators Replaced by Parkway Fabricators
-
Scuba Equipment Recalled
Internal Injury
-
Recall Of Scuba Regulators Announced
Suffocation