Model year record

2002 Honda GL1800

6 recall campaigns on file for this model year. 210 owner complaints on file.

Recalls

Recall campaignNHTSA 15V700000

Service brakes, hydraulic: foundation components: master cylinder

Component
Service brakes, hydraulic: foundation components: master cylinder
Manufacturer
Honda (American Honda Motor Co.)
Vehicles affected
145,219
Reported to NHTSA
2015-10-23
Owners notified
2015-12-07

Defect description

American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.

Safety risk

A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.

Manufacturer remedy

Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.

Recall campaignNHTSA 11V567000

Service brakes, hydraulic: foundation components: master cylinder

Component
Service brakes, hydraulic: foundation components: master cylinder
Manufacturer
HONDA (AMERICAN HONDA MOTOR CO.)
Vehicles affected
126,000
Reported to NHTSA
2011-12-01
Owners notified
2012-01-06

Defect description

HONDA IS RECALLING CERTAIN MODEL YEAR 2001-2010, AND MODEL YEAR 2012 GL1800 GOLDWING MOTORCYCLES. UNDER CERTAIN CONDITIONS, THERE IS A POSSIBILITY THAT THE COMBINED BRAKING SYSTEM'S SECONDARY MASTER CYLINDER MAY CAUSE THE REAR BRAKE TO DRAG.

Safety risk

UNEXPECTED BRAKING INCREASES THE RISK OF A CRASH, AND RIDING THE MOTORCYCLE WITH THE REAR BRAKE DRAGGING MAY GENERATE ENOUGH HEAT TO CAUSE THE REAR BRAKE TO CATCH FIRE.

Manufacturer remedy

HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SECONDARY MASTER CYLINDER AND IF NECESSARY, REPLACE IT, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 6, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-866-784-1870.

Recall campaignNHTSA 05V027000

Structure: frame and members

Component
Structure: frame and members
Manufacturer
HONDA (AMERICAN HONDA MOTOR CO.)
Vehicles affected
34,919
Reported to NHTSA
2005-01-31
Owners notified
2005-02-09

Defect description

ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.

Safety risk

THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.

Recall campaignNHTSA 05V010000

Service brakes, hydraulic

Component
Service brakes, hydraulic
Manufacturer
HONDA (AMERICAN HONDA MOTOR CO.)
Vehicles affected
36,046
Reported to NHTSA
2005-01-24
Owners notified
2005-01-31

Defect description

CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR.

Safety risk

IF THE MOTORCYCLE CONTINUES TO BE USED AFTER A LEAK OCCURS, THE REAR BRAKE WOULD EVENTUALLY BECOME INOPERATIVE. A LOSS OF REAR BRAKE FORCE COULD INCREASE THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT THE REAR BRAKE FORLEAKAGE. IF LEAKAGE IS CONFIRMED, THE DEALER WILL REPLACE THE PCV FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 31, 2005. OWNERS MAY CONTACT HONDA AT 866-784-1870.

Recall campaignNHTSA 03V350000

Structure: frame and members: underbody shields

Component
Structure: frame and members: underbody shields
Manufacturer
AMERICAN HONDA MOTOR CO.
Vehicles affected
8,196
Reported to NHTSA
2003-09-26
Owners notified
2003-10-03

Defect description

ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.

Safety risk

THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.

Recall campaignNHTSA 02V340000

Fuel system, gasoline: delivery: fuel pump

Component
Fuel system, gasoline: delivery: fuel pump
Manufacturer
AMERICAN HONDA MOTOR CO.
Vehicles affected
660
Reported to NHTSA
2002-12-23
Owners notified
2002-12-23

Defect description

ON CERTAIN MOTORCYCLES, THE BANK ANGLE SENSORS DESIGNED TO SHUT OFF THE FUEL PUMP AND THE ENGINE ELECTRICAL POWER IN THE EVENT THE MOTORCYCLE FALLS OVER, WERE INSTALLED USING THE WRONG SIZE SCREWS ALLOWING THE SCREWS TO EVENTUALLY DETACH FROM THEIR MOUNTING POINT.

Safety risk

IF THE SENSOR DETACHES, THE ENGINE WILL STOP UNEXPECTEDLY. SUDDEN LOSS OF ENGINE POWER, ESPECIALLY WHILE TURNING, COULD CAUSE A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT THE MOUNTING SCREW SIZE AND, IF NECESSARY, INSTALL SCREWS OF THE CORRECT SIZE. OWNER NOTIFICATION BEGAN DECEMBER 23, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-289-8226.

Owner complaints

A complaint is one person's report to a federal agency. It is not a finding.

ComponentComplaintsMedian mileage
Engine and engine cooling: cooling system913,427 mi
Engine and engine cooling214,500 mi
Structure: frame and members1912,600 mi
Tires116,500 mi
Suspension73,000 mi
Engine and engine cooling: engine: gasoline6400 mi
Engine and engine cooling: cooling system: fan5600 mi
Steering430,000 mi
Structure4153,950 mi
Structure: body4153,950 mi
Structure: frame and members: underbody shields431,500 mi
Unknown or other414,000 mi
Electrical system327,980 mi
Service brakes, hydraulic35,000 mi
Engine and engine cooling: engine24,500 mi
Power train: manual transmission2120 mi
Visibility: windshield252,000 mi
Electrical system: ignition130,850 mi
Engine and engine cooling: cooling system: hoses/lines/piping/fittings1
Engine and engine cooling: exhaust system1
Equipment: electrical: radio/tape deck/CD etc.1
Exterior lighting1
Power train: automatic transmission: control module (TCM/PCM/TECM)1
Power train: driveline: driveshaft18,700 mi
Service brakes1186,000 mi
Service brakes, hydraulic: antilock/traction control/electronic limited slip12,300 mi
Service brakes, hydraulic: foundation components: master cylinder1
Steering: steering wheel/handle bar1
Steering: gear box (other than rack and pinion)1
Structure: motorcycle: kickstand/center stand112,600 mi
Suspension: front17,000 mi
Suspension: front: wheel bearing1
Vehicle speed control1
Visibility: rearview mirrors/devices1
Wheels1

The 2001 model has 2 times as many complaints as this one. The 2003 model has 2 times as many complaints as this one. These figures reflect raw complaint counts, not failure rates. Higher-selling model years naturally receive more complaints.

Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.