THESE BUSES HAVE A TURN SIGNAL LEVER THAT WILL NOT OPERATE CONSISTENTLY IN THE LANE CHANGE MODE IF THE LEVER IS NOT MOVED TO THE POSITION WHERE RESISTANCE TO MOVEMENT IS FELT.
Safety risk
SHOULD THE REAR SIGNAL LAMPS NOT FLASH WHEN A LANE CHANGE WAS BEING MADE, IT COULD RESULT IN A VEHICLE FOLLOWING THE BUS TO COLLIDE WITH THE BUS INCREASING THE RISK OF PERSONAL INJURY AND/OR PROPERTY DAMAGE.
Manufacturer remedy
OPERATORS WILL BE MAILED INFORMATION CONCERNING THE PROPER METHOD OF USING TURN SIGNALS. A DECAL WILL ALSO BE PROVIDED TO BE PLACED ON THE INSTRUMENT PANEL OF EACH BUS.
THE WIRE END OF THE HAND THROTTLE CABLE PASSES THROUGH A SPLIT PLASTIC GROMMET IN THE ACCELERATOR ROD. THIS WIRE CAN WORK THROUGH THE SLOT IN THE GROMMET AND BECOME LODGED BETWEEN THE GROMMET AND THE EDGE OF THE HOLE IN THE ACCELERATOR ROD.
Safety risk
IF THE THROTTLE WIRE BECOMES LODGED, THE ACCELERATOR CAN STICK AND NOT RETURN TO IDLE POSITION POTENTIALLY AFFECTING THE OPERATOR'S ABILITY TO CONTROL THE VEHICLE AND INCREASING THE POTENTIAL FOR AN ACCIDENT.
Manufacturer remedy
DEALERS WILL REPAIR BUSES BY INSTALLING A NEW CABLE GROMMET WITHOUT A SLOT; INSTALL A NEW CABLE STOP; AND READJUST THE THROTTLE CABLE.
Fuel system, gasoline: storage: tank assembly: mounting
Manufacturer
INTERNATIONAL TRUCK AND ENGINE
Vehicles affected
10,629
Reported to NHTSA
1993-07-07
Owners notified
1993-07-08
Defect description
THE FUEL TANK CAGE ASSEMBLY BOLTS MOUNTING THE VERTICAL STRAPS TO THE HORIZONTAL ANGLE WERE ASSEMBLED WITH THE THREADED END OF THE BOLTS FACING THE FUEL TANK.
Safety risk
IF THE FUEL TANK CAGE IS STRUCK WITH SUFFICIENT FORCE ITIS POSSIBLE FOR THE BOLTS TO PIERCE THE FUEL TANK AND CAUSE FUEL LEAKAGE.FUEL LEAKAGE EXPOSED TO A SOURCE OF IGNITION CAN RESULT IN A FIRE.
Manufacturer remedy
THE FUEL TANK CAGE MOUNTING BOLTS WILL BE REMOVED AND REINSTALLED WITH THE BOLT HEAD TOWARD THE TANK.
THE PRESSURE RELIEF VALVE WAS OMITTED IN THE AIR TANK. THE AIR TANK IS THE RESERVOIR FOR THE AIR SUSPENSION AND IS NOT BRAKE RELATED. WITHOUT THE PRESSURE RELIEF VALVE, THERE IS NO BACK-UP SYSTEM TO LIMIT AIR PRESSURE IN THE AIR SUSPENSION SYSTEM.
Safety risk
LACK OF A BACK-UP SYSTEM TO LIMIT AIR PRESSURE BUILD UPCAN CAUSE EXCESSIVE PRESSURE IN THE AIR TANK AND CAN CAUSE THE TANK TO RUPTURE.THIS CAN RESULT IN PERSONAL INJURY TO ANYONE IN THE VICINITY.
THE FUEL TANK WAS PUNCTURED, RESULTING IN FLUID LOSSGREATER THAN ALLOWED BY FMVSS 301, "FUEL SYSTEM INTEGRITY". FUEL SPILLS INA COLLISION COULD LEAD TO A VEHICLE FIRE IF EXPOSED TO A SOURCE OF IGNITION.
Manufacturer remedy
MODIFY THE FUEL TANK CAGE TO COMPLY WITH FMVSS 301.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.