Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
Manufacturer
NAVISTAR, INC
Vehicles affected
338
Reported to NHTSA
2012-01-18
Owners notified
2012-04-27
Defect description
NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2005-2011 INTERNATIONAL 3200IM, AND MODEL YEAR 2007-2011, IC BUS MODEL HC BUSES, MANUFACTURED FROM AUGUST 16, 2004, THROUGH MAY 13, 2010. WHEN THE BUS KNEELING FEATURE IS ACTIVATED, THE REAR BRAKE LINE MAY BE PINCHED BY A FRAME MEMBER CAUSING THE REAR BRAKES TO DRAG.
Safety risk
BRAKES THAT DRAG COULD OVERHEAT AND MAY LEAD TO A FIRE, WHICH MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Manufacturer remedy
NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL INSTALL A CLIP TO ENSURE THAT THE BRAKE LINE CANNOT BE PINCHED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 27, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.
NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2010 INTERNATIONAL TRUCKS AND IC COMMERCIAL BUSES MANUFACTURED FROM DECEMBER 4, 2001 THROUGH DECEMBER 14, 2009 EQUIPPED WITH INTERNATIONAL VT365 ENGINES HAVING ENGINE CALIBRATION PAN2PVR0, PAN2PVR1, OR PAN2PWR. THE ENGINE NORMALLY RESPONDS TO A FAILED OPEN ACCELERATOR POSITION SENSOR CIRCUIT FAULT BY RETURNING THE ENGINE TO LOW IDLE SPEED OF 800 RPM AND DISABLING THE DRIVER'S ABILITY TO INCREASE THE ENGINE SPEED. HOWEVER IF THE OPEN CIRCUIT CORRECTS ITSELF WITHIN 30 SECONDS OF INITIATION, ENGINE SPEED COULD SUDDENLY INCREASE TO A HIGH IDLE SPEED OF 1200 RPM.
Safety risk
THIS INCREASE TO HIGH IDLE SPEED MAY OCCUR WITHOUT WARNING CAUSING A SUDDEN AND UNEXPECTED SHIFT IN VEHICLE POSITION POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Manufacturer remedy
NAVISTAR WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 1, 2010. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.
NAVISTAR IS RECALLING 24,975 MY 2003 THROUGH 2008 IC BE, CE, HC, AND RE SCHOOL AND COMMERCIAL BUSES AND 2002 THROUGH 2008 INTERNATIONAL 3200 AND 3300 MODEL BUSES MANUFACTURED BETWEEN SEPTEMBER 21, 2001 THROUGH DECEMBER 14, 2007, EQUIPPED WITH INTERNATIONAL VT365 ENGINES. THESE VEHICLES MAY EXHIBIT ENGINE HARD START, NO START, OR STALL CONDITIONS DUE TO POSSIBLY DAMAGED TERMINALS IN THE FUSE HOLDER CONNECTOR OF THE INJECTOR DRIVE MODULE (IDM) CLEAN BATTERY POWER CIRCUITS. THE TERMINALS MAY HAVE BEEN DAMAGED DURING ELECTRICAL CONTINUITY TESTING IN THE MANUFACTURING PROCESS.
Safety risk
THESE CONDITIONS COULD RESULT IN A VEHICLE CRASH, POSSIBLY RESULTING IN PERSONAL INJURY.
Manufacturer remedy
NAVISTAR WILL NOTIFY OWNERS AND REPLACE THE IDM FUSE HOLDER FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 3, 2008. OWNERS CAN CONTACT NAVISTAR TOLL-FREE AT 1-800-448-7825.
CERTAIN MY 2005 THROUGH 2006 INTERNATIONAL HEAVY TRUCKS AND IC CORP CE SCHOOL BUSES MANUFACTURED BETWEEN JUNE 4, 2004, AND MARCH 31, 2005. THE ANCHOR BOLT THAT IS THE PIVOT POINT FOR THE DRIVELINE PARKING BRAKE SHOES MAY FATIGUE AND BREAK AS A RESULT OF AN INCORRECT SURFACE TREATMENT.
Safety risk
IF THE BOLT BREAKS, THE PARK BRAKE MAY NOT ENGAGE. THIS COULD CAUSE THE VEHICLE TO ROLL AWAY WITHOUT WARNING AND COULD RESULT IN A VEHICLE CRASH, POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Manufacturer remedy
INTERNATIONAL RECALL NO. 00518. INTERNATIONAL WILL NOTIFY OWNER AND REPLACE THE AFFECTED ANCHOR BOLTS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 14, 2005. CUSTOMERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
Suspension: front: springs: leaf spring assembly: hanger,bracket
Manufacturer
INTERNATIONAL TRUCK & ENGINE CORPORATION
Vehicles affected
703
Reported to NHTSA
2004-10-27
Owners notified
2004-11-05
Defect description
ON CERTAIN TRUCKS BUILT WITH IROS REAR AIR SUSPENSION SYSTEMS, FOUR REAR SUSPENSION FASTENERS MAY NOT BE TIGHTENED SUFFICIENTLY. THIS HARDWARE CONNECTS THE MAIN SUPPORT MEMBERS OF THE REAR SUSPENSION TO THE HANGER BRACKETS.
Safety risk
THIS CONNECTION COULD FAIL IF THE NUTS WORKED THEIR WAY LOOSE OR OFF, OR THE BOLTS BROKE FROM FATIGUE. A FAILURE OF THESE FASTENERS COULD RESULT IN SEPARATION OF THE MAIN SUPPORT FROM THE HANGER BRACKET POSSIBLY RESULTING IN A SUDDEN LOSS OF CONTROL OF THE VEHICLE, WHICH COULD RESULT IN A CRASH.
Manufacturer remedy
DEALERS WILL REPLACE ALL FOUR BOLTS AND TIGHTEN THE BOLTS PROPERLY. THE RECALL BEGAN ON NOVEMBER 5, 2004. OWNERS SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.