Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Safety risk
The incorrect window glazing material may reduce the driver's visibility, increasing the risk of a crash.
Manufacturer remedy
MCI will replace the glass, free of charge. Owner notification letters were mailed February 4, 2026. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is 22-005.
Motor Coach Industries (MCI) is recalling certain model year 1993-1995 102DL3 motor coaches manufactured November 1992 to January 1995, and 2006 and 2008 D4505 motor coaches manufactured June 2005 to April 2008. The affected buses are equipped with a driveshaft with a compressed length of 30 inches or less, a steerable trailing axle equipped with a system that changes the tag axle caster when the vehicle is in reverse travel and no electronic stability control (ESC). In these vehicles, the driveshaft may detach from the transmission and escape its containment bracket.
Safety risk
If the driveshaft escapes containment it can strike the trailing axle tie rod and components of the trailing axle locking system potentially causing the trailing axle steering and caster locking mechanisms to unlock. If this occurs, the driver may experience loss of steering control of the vehicle, increasing the risk of a vehicle crash.
Manufacturer remedy
MCI will notify owners, and dealers will add a secondary drive shaft containment hoop forward of the tag axle support structure, free of charge. The recall began on August 7, 2014. Owners may contact MCI customer service at 1-847-285-2090. MCI's number for this recall is 414.
VEHICLE DESCRIPTION: BUSES EQUIPPED WITH 4-STROKE CYCLE ENGINES. ENGINE COMPARTMENT FIRES HAVE OCCURRED AT OR NEAR THE WEBASTO DIESEL FUELED AUXILIARY HEATER.
Safety risk
PERSONAL INJURY AND PROPERTY DAMAGE CAN OCCUR DUE TO AN ENGINE COMPARTMENT FIRE.
Manufacturer remedy
MCI IS ASKING COACH OPERATORS TO DISABLE THE WEBASTO HEATER BY DISCONNECTING THE APPROPRIATE FUSES.
THE BRAKE ROD TO BRAKE ARM ATTACHING NUT AND BOLT ARE UNDERTORQUED AND MAY LOOSEN AND FALL OFF CAUSING SEPARATION OF THE ROD AND ARM.
Safety risk
SEPARATION OF THE BRAKE ROD AND THE BRAKE ARM RESULTS IN THE TOTAL LOSS OF THE SERVICE BRAKES WHICH MAY RESULT IN AN ACCIDENT.
Manufacturer remedy
MCI WILL SUPPLY 1/2" UNF "STOVER" LOCKNUT TO CUSTOMERS. THIS LOCKNUT SHOULD BE INSTALLED IMMEDIATELY AND TORQUED TO 40 LB/FT (54 NM). A FASTENER WILL ALSO BE PROVIDED TO THE CUSTOMER ALONG WITH THE INSTALLATION PROCEDURES.
THE BRACKETS USED TO RESTRAIN THE "REFERENCE-ZERO" ARM OF THE DRIVE AXLE SLACK ADJUSTERS MAY FLEX EXCESSIVELY, AND PREVENT SELF ADJUSTMENT OF THE SLACK ADJUSTERS. THIS COULD DEGRADE BRAKE EFFICIENCY AS THE BRAKE SHOES WEAR.
Safety risk
DECREASED BRAKE EFFICIENCY COULD CAUSE INCREASED STOPPINGDISTANCES, WHICH COULD RESULT IN A VEHICLE ACCIDENT.
Manufacturer remedy
A RETROFIT KIT IS TO BE INSTALLED TO CORRECT THE PROBLEM WITH THE ATTACHMENT BRACKETS.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.