New Flyer Industries, Ltd. (New Flyer) is recalling certain model year 2015 New Flyer MD30, 2012 C35LFR, 2010-2011 D35LFR, NABI 35LFW, 2011 D40LFR, 2010-2012 D60LFR and NABI 31LFW, 2010 C40LF, DE35LF, D40LF, DE40LFA, DE60LFA, GE35LFR and GE40LF, 2009 DE60LF and GE40LFR, 2010-2013 C40LFR, DE60LFR, NABI 416 and NABI 60BRT, 2010-2015 XD35, XDE40, NABI 40LFW and 42BRT, 2011-2015 XD40 and XN40, 2013-2015 XD60, XDE60 and XN35, 2010-2014 XDE35, 2013 XE40, 2012-2015 XN60, equipped with certain Recaro Ergo-M Commercial Bus Driver Seats. The affected seats have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.
Safety risk
If the seatbelt anchorage assembly separates from the J-Bracket, the bus driver may not be properly restrained in the event of a crash, increasing their risk of injury.
Manufacturer remedy
New Flyer will notify owners instructing them to inspect their seats for missing welds. Recaro will supply replacement anchorage brackets and cover the labor to replace them if any welds are missing, free of charge. The recall began on February 4, 2016. Owners may contact New Flyer customer service at 1-204-224-6706, or Recaro customer service at 1-800-873-2276. New Flyer's number for this recall is R16-001.
NABI Bus, LLC (NABI) is recalling certain model year 2012 31LFW transit buses manufactured April 28, 2012, to December 16, 2012, and 2008-2013 416 transit buses manufactured October 30, 2008, to February 15, 2014. The affected vehicles may not be equipped with a transmission interlock that prevents the wheelchair lift or ramp from being moved from the stowed position unless the transmission is in neutral. As such, the buses fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 403, "Platform Lift Systems for Motor Vehicles."
Safety risk
If the wheelchair lift or ramp can be removed from the stowed position while the transmission is not in neutral, if the service brakes fail to hold the bus, the bus may move unexpectedly, increasing the risk of injury to the wheelchair lift or ramp user.
Manufacturer remedy
NABI will notify owners, and dealers will install a new electrical program that prevents the lift or ramp from being moved from the stowed position unless the transmission is in neutral, free of charge. The recall began in November 2014. Owners may contact NABI customer service at 1-256-241-1298. NABI's number for this recall is 20146.
North American Bus Industries (NABI) is recalling certain model year 2008-2013 416 and model year 2012 31LFW transit buses manufactured October 30, 2008, through April 3, 2013 and equipped with a four-position rotary defroster switch with ring terminals. The defroster switch may overheat and melt the dash.
Safety risk
The overheating of the switch may lead to a fire or distract the driver and increase the risk of a vehicle crash.
Manufacturer remedy
NABI will notify owners and will install relays to reduce the current flow. This will be done free of charge. Owners may contact NABI at 1-256-831-4296. NABI's campaign number is 20133.
NORTH AMERICAN BUS INDUSTRIES (NABI) IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 416 TRANSIT BUSES MANUFACTURED FROM AUGUST 29, 2011, THROUGH FEBRUARY 19, 2012. THE VEHICLES HAVE A LOOSE CONNECTION IN THE JOINT BETWEEN THE STEERING PITMAN ARM AND THE STEERING DRAG LINK. THE JOINT MAY SEPARATE OVER TIME RESULTING IN LOSS OF STEERING CONTROL.
Safety risk
A LOSS OF STEERING CONTROL COULD RESULT IN A CRASH, INCREASING THE RISK OF INJURY.
Manufacturer remedy
NABI WILL INSPECT AND REPAIR VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN DURING MARCH 2012. OWNERS MAY CONTACT NABI AT 1-256-831-4296.
NORTH AMERICAN BUS INDUSTRIES (NABI) IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 416 TRANSIT BUSES MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH FEBRUARY 28, 2011, EQUIPPED WITH A CUMMINS ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
Safety risk
IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.
Manufacturer remedy
NABI IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR NABI AT 1-256-831-4296.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.