Model year record

2016 PIERCE Impel

9 recall campaigns on file for this model year. No owner complaints on file.

Recalls

Recall campaignNHTSA 26V217000

Equipment: mechanical: boom/crane/ladder

Component
Equipment: mechanical: boom/crane/ladder
Manufacturer
Pierce Manufacturing
Vehicles affected
674
Reported to NHTSA
2026-04-06
Owners notified
2026-04-28

Defect description

Pierce Manufacturing (Pierce) is recalling certain 2015-2026 Arrow XT, Enforcer, Impel, and Velocity 107’ ladder and 110’ platform aerial firetrucks equipped with a single rear axle. The firm-on-ground system light may remain illuminated after the rear stabilizer loses contact with the ground.

Safety risk

A false firm-on-ground indicator light may lead to using the aerial device when the vehicle may shift during aerial operation, increasing the risk of injury.

Manufacturer remedy

Pierce will provide instructions on how to update the vehicle software and perform an aerial device functional check, free of charge. Owner notification letters were mailed April 29, 2026. Owners may contact Pierce customer service at 1-888-974-3723.

Recall campaignNHTSA 19V022000

Electrical system: software

Component
Electrical system: software
Manufacturer
Pierce Manufacturing
Vehicles affected
994
Reported to NHTSA
2019-01-02
Owners notified
2019-02-28

Defect description

Pierce Manufacturing (Pierce) is recalling certain 2004-2018 Arrow XT, Dash, Enforcer, Impel, Quantum and Velocity aerial vehicles. The aerial device may unexpectedly rotate to the right when the ladder is being extended.

Safety risk

If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.

Manufacturer remedy

Pierce will notify owners, and dealers will reprogram the aerial control module, free of charge. The recall began February 28, 2019. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B295.

Recall campaignNHTSA 18V463000

Structure

Component
Structure
Manufacturer
Pierce Manufacturing
Vehicles affected
17
Reported to NHTSA
2018-07-11
Owners notified
2018-08-22

Defect description

Pierce Manufacturing (Pierce) is recalling certain 2007-2017 Pierce Velocity, Impel, Arrow-XT, Quantum, and Enforcer emergency response vehicles equipped with 75ft aerial devices with a 21 inch or 28 inch limited retraction bracket. The bracket on the aerial device may detach from the aerial and fall to the ground.

Safety risk

If the bracket falls, it could strike a person below.

Manufacturer remedy

Pierce will notify owners, and dealers will install additional hardware to mount the limited retraction bracket, free of charge. The recall began on August 22, 2018. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B290.

Recall campaignNHTSA 17V570000

Steering: linkages: tie rod assembly

Component
Steering: linkages: tie rod assembly
Manufacturer
Pierce Manufacturing
Vehicles affected
56
Reported to NHTSA
2017-09-14
Owners notified
2017-11-30

Defect description

Pierce Manufacturing (Pierce) is recalling certain 2015-2016 Arrow XT, Enforcer, Impel, Quantum, Saber, and Velocity vehicles, equipped with certain Spicer D-Series and E-Series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

Safety risk

If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.

Manufacturer remedy

Pierce will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 30, 2017. Owners may contact Pierce customer service at 1-414-832-3000.

Recall campaignNHTSA 17V455000

Equipment

Component
Equipment
Manufacturer
Pierce Manufacturing
Vehicles affected
65
Reported to NHTSA
2017-07-18
Owners notified
2017-08-01

Defect description

Pierce Manufacturing (Pierce) is recalling certain 2016-2017 Arrow XT, Enforcer, Impel, Quantum, and Velocity fire trucks equipped with Hale Pump Interlock Module Kits. The Hale interlock pressure switch can fail after prolonged exposure to extreme cold temperatures, preventing the fire truck water pump from operating.

Safety risk

If the fire truck cannot pump water during a fire emergency, there would be an increased risk of injury.

Manufacturer remedy

Pierce will notify owners, and Hale Products dealers will replace the interlock modules, free of charge. The recall began on March 24, 2017. Owners may contact Hale customer service at 1-800-533-3569 or Pierce customer service at 1-414-832-3000. Pierce's number for this recall is 74B281.

Recall campaignNHTSA 16V585000

Power train: manual transmission

Component
Power train: manual transmission
Manufacturer
Pierce Manufacturing
Vehicles affected
470
Reported to NHTSA
2016-08-05
Owners notified
2016-09-02

Defect description

Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow, Dash, Enforcer, Impel, Quantum, Saber, and Velocity fire trucks manufactured June 29, 2015, to June 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or power to an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.

Safety risk

If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.

Manufacturer remedy

Piece will notify owners, and dealers will remove the shift unit assembly and replace the clevis pin and retaining rings, free of charge. The recall began on September 2, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B277.

Recall campaignNHTSA 16V551000

Equipment

Component
Equipment
Manufacturer
Pierce Manufacturing
Vehicles affected
8
Reported to NHTSA
2016-07-22
Owners notified
2016-07-26

Defect description

Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Enforcer, Impel, and Velocity vehicles manufactured April 12, 2016, to May 31, 2016, equipped with aerial devices. The affected vehicles may have a plastic plug installed in an unused port in the hydraulic pump for the aerial device. This plastic plug may separate from the pump resulting in a hydraulic fluid leak, potentially disabling the aerial device.

Safety risk

The inoperable aerial device can increase the risk of injury if the operator needs to move away from a hazardous situation or it may impede the safety mission.

Manufacturer remedy

Pierce has notified owners, and dealers will inspect the vehicles and replace the plastic plug with a metal plug, as necessary, free of charge. The recall began on July 26, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B276.

Recall campaignNHTSA 16V390000

Equipment

Component
Equipment
Manufacturer
Pierce Manufacturing
Vehicles affected
114
Reported to NHTSA
2016-06-01
Owners notified
2016-06-16

Defect description

Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow XT, Enforcer, Impel, Quantum, Saber, and Velocity emergency vehicles manufactured August 4, 2015, to August 24, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.

Safety risk

If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.

Manufacturer remedy

Pierce will notify owners to check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on June 16, 2016. Owners may contact Pierce customer service at 1-888-974-3723 or Hale Products Customer Service Center at 1-800-533-3569. Pierce's number for this recall is 74B272.

Recall campaignNHTSA 16V123000

Power train: driveline: driveshaft

Component
Power train: driveline: driveshaft
Manufacturer
Pierce Manufacturing
Vehicles affected
239
Reported to NHTSA
2016-03-02
Owners notified
2016-03-25

Defect description

Pierce Manufacturing (Pierce) is recalling certain model year 2016 Arrow-XT, Dash, Enforcer, Impel, Quantum, Saber, and Velocity fire and emergency vehicles manufactured October 13, 2015, to February 9, 2016. The fastener cap over the bearing on the universal joint of the drive shaft may have been improperly tightened.

Safety risk

If the cap was not properly tightened, the cap may detach from the vehicle and become a road hazard. Additionally, the universal joint may separate and the vehicle may not be able to be driven, increasing the risk of a crash.

Manufacturer remedy

Pierce will notify owners, and dealers will check and correct the tightness of all bolts for the universal joint caps, as needed, free of charge. The recall began on March 25, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B270.

Owner complaints

A complaint is one person's report to a federal agency. It is not a finding.

No complaints recorded for this model year.

Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.