Power train: clutch assembly: pedal/hand lever(motorcycle)
Manufacturer
AMERICAN SUZUKI MOTOR CORP.
Vehicles affected
2,033
Reported to NHTSA
1979-10-29
Owners notified
1979-10-23
Defect description
IF THE CLUTCH CABLE WAS FORCEFULLY PULLED OR PUSHED UPON DURING THE CRATING PROCESS AT THE FACTORY, THE CLUTCH CABLE MAY HAVE BECOME DISLODGED FROM ITS CABLE RETAINER. IT MAY CONTACT THE CARBURETOR THROTTLE SHAFT CONNECTOR AND PREVENT THE THROTTLE PLATES FROM RETURNING TO IDLE.
Manufacturer remedy
DEALER WILL INSTALL AN ADDITIONAL CLUTCH CABLE RETAINER TO PREVENT DISLODGEMENT AT NO COST TO OWNER.
THERE IS A POSSIBILITY THAT ONE OR MORE BOLTS WHICH TRANSMIT THE POWER FROM THE FINAL DRIVE GEAR CASE TO THE REAR WHEEL COULD BREAK IF THE RETAINING NUTS SHOULD LOOSEN AND THE MOTORCYCLE IS SUBJECTED TO SEVERE USAGE. SHOULD THIS HAPPEN, THE BROKEN PORTION OF THE BOLT COULD LODGE BETWEEN THE FINAL DRIVE GEAR CASE AND THE REAR WHEEL, CAUSING ABNORMAL NOISE, COSMETIC DAMAGE TO THE WHEEL AND GEAR CASE, AND POSSIBLE REAR WHEEL LOCK-UP AT LOW SPEED.
Manufacturer remedy
THE DEALER WILL REPLACE THE DRIVE JOINT ASSEMBLY WITH A MODIFIED ASSEMBLY, AT NO COST TO OWNER.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.