Daimler Trucks North America, LLC (DTNA) is recalling certain 2020 Freightliner Cascadia, 2020-2022 Western Star 4700 and 5700, 2022 Western Star 4900, and 2020-2023 Freightliner New Cascadia vehicles. The Gross Axle Weight Rating (GAWR) listed on the Federal Certification Label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
Safety risk
An overloaded vehicle can increase the risk of a crash.
Manufacturer remedy
Dealers will be replace the GAWR labels, free of charge. Owner notification letters were mailed July 14, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-933.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner 114SD, 122SD, Business Class M2, Cascadia, 108SD, Western Star 4900, 4700, 5700, Custom Chass RV Chassis, Custom Chass S2 Chassis, Custom Chass XC Chassis, Custom Chass XB Chassis, and Custom Chass MT Chassis. The tie rod clamps may be loose, which could result in loose tie rod ends that could break or detach.
Safety risk
Detached or broken tie rod ends can result in steering loss, increasing the risk of a crash.
Manufacturer remedy
Dealers will replace the tie rod clamp bolts and nuts, free of charge. Owner notification letters were mailed December 23, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-888.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia, Business Class M2, 114SD, 108SD, 122SD, Custom Chass S2 Chassis, Custom Chass XB Chassis, Custom Chass XC Chassis, and Custom Chass MT Chassis Western Star 4700, 4900, 5700 vehicles. The steering arm and tie rod bolts may have a defective seam that can fracture.
Safety risk
A fractured bolt may cause a loss of steering, increasing the risk of a crash.
Manufacturer remedy
DTNA will notify owners, and dealers will replace the tie rod arm and steering arm bolts, free of charge. The recall began on June 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-884.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Western Star 4700 and Western Star 5700 vehicles. The ground harness wiring may be undersized and may cause a connector to melt.
Safety risk
Damage to the ground harness may cause an engine stall, increasing the risk of a crash.
Manufacturer remedy
DTNA will notify owners, and dealers will replace the ground harness, free of charge. The recall is expected to begin May 22, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-880.
Service brakes, hydraulic: foundation components: disc: caliper
Manufacturer
Daimler Trucks North America, LLC
Vehicles affected
133
Reported to NHTSA
2021-01-20
Owners notified
2021-03-17
Defect description
Daimler Trucks North America, LLC (DTNA) is recalling 2021 Western Star 4700 and 5700, Freightliner Business Class M2, Cascadia, and Custom Chassis XC Chassis vehicles manufactured with a certain steering arm configuration with air disc brakes identified by the axle assembly supplier. On certain vehicles, one of the six brake caliper mounting bolts on the driver side steer axle may have been incorrectly tightened.
Safety risk
The loose bolt could result in the other caliper bolts to loosen. Insufficiently tightened bolts may not provide adequate clamping force between the brake caliper and brake anchor plate, resulting in reduced brake effectiveness, increasing the risk of a crash.
Manufacturer remedy
DTNA will notify owners, and dealers will inspect and repair as necessary, free of charge. The recall began March 17, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-873.
Daimler Trucks North America LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia, 2021 Freightliner 108SD, 114SD and Business Class M2 and Western Star 4700, 4900 and 5700 vehicles. The steer axle spindle nut snap-ring locking feature may be incorrectly installed or missing from the left spindle nut at the spindle.
Safety risk
A missing or improperly installed locking snap ring can result in wheel-end failure and potentially a wheel-off/separation condition, increasing the risk of crash.
Manufacturer remedy
DTNA will notify owners, and dealers will inspect the hub cap plug, and reinstall or replace of the snap-ring as needed, free of charge. The recall began December 18, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-866.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2021 Western Star 4700 and 5700 vehicles. A particular wire in the ground harness may be undersized, possibly resulting in a melted connector in the ground circuit harness. If the connector becomes damaged, under certain circumstances, the engine may stall without the ability to restart.
Safety risk
An engine stall may increase the risk of a crash.
Manufacturer remedy
DTNA will notify owners, and dealers will replace the ground harness, free of charge. This recall began June 23, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-852.
Owner complaints
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Open investigations
An investigation is not a recall. It indicates that NHTSA is currently evaluating an alleged defect but has not reached a final determination.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.