Recalls
Recall campaignNHTSA 25V562000
- Component
- Structure: frame and members
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 903
- Reported to NHTSA
- 2025-08-29
- Owners notified
- 2025-10-24
Defect description
Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Safety risk
A cable step that fails during use increases the risk of injury.
Manufacturer remedy
Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Recall campaignNHTSA 24V015000
- Component
- Electrical system: 12V/24V/48V battery: cables
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 437
- Reported to NHTSA
- 2024-01-11
- Owners notified
- 2024-03-08
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Safety risk
A short circuit increases the risk of a fire.
Manufacturer remedy
Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
Recall campaignNHTSA 23V216000
- Component
- Structure: body
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 1,967
- Reported to NHTSA
- 2023-03-30
- Owners notified
- 2023-05-26
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Safety risk
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Manufacturer remedy
Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.
Recall campaignNHTSA 22V613000
- Component
- Equipment: mechanical: boom/crane/ladder
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 975
- Reported to NHTSA
- 2022-08-10
- Owners notified
- 2022-10-07
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.
Safety risk
A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Manufacturer remedy
Altec will inspect and repair cracks found in the base boom, free of charge. Owner notification letters were mailed October 7, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3017.
Recall campaignNHTSA 22V577000
- Component
- Electrical system: wiring: fuses and circuit breakers
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 594
- Reported to NHTSA
- 2022-08-04
- Owners notified
- 2022-09-30
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.
Safety risk
A blown fuse can cause an engine stall, increasing the risk of a crash.
Manufacturer remedy
Altec will install a relay, free of charge. Owner notification letters are expected to be mailed September 30, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3015.
Recall campaignNHTSA 22V146000
- Component
- Equipment
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 46
- Reported to NHTSA
- 2022-03-11
- Owners notified
- 2022-05-06
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.
Safety risk
Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
Manufacturer remedy
Altec will install a carbon monoxide detector and safety alert placard, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 864.
Recall campaignNHTSA 22V147000
- Component
- Fuel system, diesel: delivery: hoses, lines/piping, and fittings
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 27,270
- Reported to NHTSA
- 2022-03-11
- Owners notified
- 2022-05-06
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.
Safety risk
Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.
Manufacturer remedy
Altec will provide work instructions and a kit to properly secure the fuel line, and repair any damaged fuel line if necessary, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 855.
Recall campaignNHTSA 22V071000
- Component
- Equipment: mechanical: boom/crane/ladder
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 167
- Reported to NHTSA
- 2022-02-09
- Owners notified
- 2022-04-08
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.
Safety risk
Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the bulkhead plate, and add a reinforcement plate, free of charge. Owner notification letters were mailed on April 8, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 851.
Recall campaignNHTSA 22V058000
- Component
- Equipment: mechanical: boom/crane/ladder: turntable
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 157
- Reported to NHTSA
- 2022-02-03
- Owners notified
- 2022-04-04
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety risk
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on April 4, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 846.
Recall campaignNHTSA 21V998000
- Component
- Equipment: mechanical: boom/crane/ladder: motor/hydraulic pump
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 150
- Reported to NHTSA
- 2021-12-20
- Owners notified
- 2022-02-18
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.
Safety risk
The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Manufacturer remedy
Altec will inspect and correct the plumbing as necessary, free of charge. Owner notification letters are expected to be mailed February 18, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 842.
Recall campaignNHTSA 21V722000
- Component
- Equipment: mechanical: boom/crane/ladder: turntable
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 94
- Reported to NHTSA
- 2021-09-16
- Owners notified
- 2021-11-15
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety risk
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on November 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 833.
Recall campaignNHTSA 21V409000
- Component
- Equipment adaptive/mobility
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 1,977
- Reported to NHTSA
- 2021-06-01
- Owners notified
- 2021-07-28
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Safety risk
Unintended movement of the lower and upper booms increases the risk of injury.
Manufacturer remedy
Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 823.
Recall campaignNHTSA 21V239000
- Component
- Structure: critical fasteners
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 120
- Reported to NHTSA
- 2021-04-05
- Owners notified
- 2021-05-21
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.
Safety risk
Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.
Manufacturer remedy
Altec will notify owners, and dealers will replace the rotation bearing fasteners, free of charge. The recall began on May 21, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 807.
Recall campaignNHTSA 21V012000
- Component
- Equipment: mechanical: boom/crane/ladder
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 213
- Reported to NHTSA
- 2021-01-15
- Owners notified
- 2021-03-16
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.
Safety risk
The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.
Manufacturer remedy
Altec will notify owners, and will require them to attach a capacity placard to the radio remote using a lanyard if it is missing, free of charge. The recall began on March 16, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 792.
Recall campaignNHTSA 20V765000
- Component
- Equipment
- Manufacturer
- Altec Industries, Inc.
- Vehicles affected
- 4,987
- Reported to NHTSA
- 2020-12-10
- Owners notified
- 2021-02-09
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2018-2020 AA, AM, AN, A-Class, TA, DM, DL, DXXXX, DC, and DT digger derricks and aerial device vehicles equipped with a DC pump. A hydraulic check valve can have a snap ring failure resulting in the snap ring becoming lodged in a counterbalance or control valve allowing continued movement.
Safety risk
Unintended boom movement may result in potential injury and or property damage.
Manufacturer remedy
Altec will notify owners, and dealers will replace the valve's snap ring, free of charge. The recall began February 9, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 787.
Recall campaignNHTSA 20V502000
- Component
- Engine and engine cooling: exhaust system: emission control
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 17
- Reported to NHTSA
- 2020-08-25
- Owners notified
- 2020-10-16
Defect description
Altec Industries Inc. is recalling certain 2015-2018 LR7, ALB, AC18, AC23, and AC38 vehicles built on an International N9/N10 chassis. During an HC Desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flow. The increased pump flow can result in the moving speed of the boom changing.
Safety risk
The change in boom speed can result in unintended positioning of the boom, increasing the risk of injury.
Manufacturer remedy
Altec will notify owners, and dealers install an update that will reprogram the low idle preset to 850 RPM, free of charge. The recall began October 16, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 774.
Recall campaignNHTSA 20V401000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 2,550
- Reported to NHTSA
- 2020-07-10
- Owners notified
- 2020-09-08
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.
Safety risk
Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.
Manufacturer remedy
Altec will notify owners, and dealers will inspect and replace the heat shield with a redesigned version, as well as install plumbing to relocate a pressure switch and install hoses with improved routing to increase their distance from heat sources, free of charge. The recall began September 8, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 767.
Recall campaignNHTSA 20V301000
- Component
- Equipment: other: labels
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 396
- Reported to NHTSA
- 2020-05-26
- Owners notified
- 2020-07-24
Defect description
Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.
Safety risk
If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.
Manufacturer remedy
Altec will notify owners and provide instructions for inspecting the bumper and receiver tube for damage and repairing as necessary and installing the proper hitch load rating placards on the unit. This recall began July 24, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 761.
Recall campaignNHTSA 20V282000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 157
- Reported to NHTSA
- 2020-05-19
- Owners notified
- 2020-07-02
Defect description
Altec Industries Inc. (Altec) is recalling certain 2018-2020 AA55, AM50 and A77 Aerial Devices and D2, D3, D4, DH-B and DH-H Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5185) may fail.
Safety risk
If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.
Manufacturer remedy
Altec will notify owners and will provide replacement fasteners if necessary, free of charge. This recall began July 2, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 760.
Recall campaignNHTSA 19V779000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 15
- Reported to NHTSA
- 2019-10-30
- Owners notified
- 2019-12-16
Defect description
Altec Industries Inc. (Altec) is recalling certain 2018-2019 AT200A, AT235, AT235P, AT37-G, AT40-G and AT248F Aerial Devices. The aerial devices have not been stability tested in accordance with ANSI A92.2.
Safety risk
An unstable aerial device may suddenly collapse, increasing the risk of injury or death.
Manufacturer remedy
Altec will notify owners, instructing them to perform a stability test. The recall began December 16, 2019. Owners may contact Altec customer service at 1-877-462-5832.
Recall campaignNHTSA 19V602000
- Component
- Equipment: mechanical: winch
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 23
- Reported to NHTSA
- 2019-08-15
- Owners notified
- 2019-10-07
Defect description
Altec Industries Inc. (Altec) is recalling certain 2012-2019 Altec AM60E, AA55E, AH75/85/100, AH125, and AH150 Aerial Devices. The recovery winch valve may allow the winch to lift more than it is rated for.
Safety risk
If the recovery winch attempts to lift more than it is rated for, it can increase the risk of an injury or death.
Manufacturer remedy
Altec will notify owners, and instruct owners to inspect the winch pressures and install an external pressure relief valve, if necessary, free of charge. The recall began October 7, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 734.
Recall campaignNHTSA 19V578000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 118
- Reported to NHTSA
- 2019-08-06
- Owners notified
- 2019-08-09
Defect description
Altec Industries Inc. (Altec) is recalling certain 2018-2019 LR7, TA50, TA55, TA60 and TDA58 Aerial Devices. The high strength fasteners used to secure the pedestal to the turntable may fail.
Safety risk
If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.
Manufacturer remedy
Altec has notified owners, and dealers will inspect the fasteners, replacing them as necessary, free of charge. The recall began August 9, 2019. Owners may contact Altec customer service at 1-877-462-5832.
Recall campaignNHTSA 19V573000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 32
- Reported to NHTSA
- 2019-08-05
- Owners notified
- 2019-09-13
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2019 LS60 Aerial Devices. The aerial devices may not meet all aerial level ground and slope stability requirements, allowing the units to become unstable and possibly overturn.
Safety risk
An unstable aerial device can increase the risk of injury.
Manufacturer remedy
Altec will notify owners, instructing them to replace the unit load charts, adjust the Hydraulic Overload Protection (HOP) settings, verify the unit has the proper counterweight, and perform a stability test. The recall began September 13, 2019. Owners may contact Altec customer service at 1-877-462-5832.
Recall campaignNHTSA 19V508000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 59
- Reported to NHTSA
- 2019-07-02
- Owners notified
- 2019-08-22
Defect description
Altec Industries Inc. (Altec) is recalling certain 2018-2019 AT37/41/48 and L37/42/44 Aerial Devices. The high strength fasteners used to secure the pedestal to the turntable may fail.
Safety risk
If the fasteners fail, the pedestal may separate from the turntable, increasing the risk of injury or death.
Manufacturer remedy
Altec will notify owners, and dealers will replace the fasteners, free of charge. The recall began August 22, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 725.
Recall campaignNHTSA 19V483000
- Component
- Service brakes, air
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 957
- Reported to NHTSA
- 2019-06-21
- Owners notified
- 2019-08-15
Defect description
Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec TA45, TA50, TA55, TA60, L37, L39, LRV, LR7, A-T40C, T40P and AP45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage in the accessory air system. Additionally, the air cushioned pintle hook may have been connected to the incorrect air lines. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Safety risk
Loss of service brake pressure can increase the risk of a crash.
Manufacturer remedy
Altec will notify owners, and dealers will inspect the pressure protection installation and repair any unit that does not pass inspection, free of charge. The recall began August 15, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 724.
Recall campaignNHTSA 19V455000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 542
- Reported to NHTSA
- 2019-06-17
- Owners notified
- 2019-07-31
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2018 LR7, TA50/55/60 and L42/45 Aerial Devices. Multiple fasteners used to secure the rotation bearing may break, possibly resulting in the pedestal separating from the turntable.
Safety risk
If the pedestal separates from the turntable, it can increase the risk of injury or death.
Manufacturer remedy
Altec will notify owners, and dealers will replace the affected fasteners, free of charge. The recall began July 31, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 722.
Recall campaignNHTSA 19V409000
- Component
- Equipment
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 435
- Reported to NHTSA
- 2019-06-04
- Owners notified
- 2019-07-25
Defect description
Altec Industries Inc. (Altec) is recalling certain 2016-2019 LR7 Series Aerial Devices. The aerial device can be operated without the rear outriggers being deployed, which may cause the unit to be unstable.
Safety risk
An unstable aerial device may suddenly collapse, increasing the risk of injury.
Manufacturer remedy
Altec will notify owners, and dealers will inspect the vehicles and correct them to require the proper outrigger operation, as necessary, free of charge. The recall began July 25, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 720.
Recall campaignNHTSA 19V303000
- Component
- Equipment: mechanical
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 153
- Reported to NHTSA
- 2019-04-15
- Owners notified
- 2019-04-18
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, TA50, TA55, TA60, and TA45M-T50 Aerial Devices. The fasteners that are used to secure the turntable to the pedestal may fail.
Safety risk
If multiple fasteners fail, the pedestal and turntable may separate, increasing the risk of death or injury.
Manufacturer remedy
Altec has notified owners and dealers will inspect and replace the defective fasteners, free of charge. The recall began April 18, 2019. Owners may contact Altec customer service 1-877-462-5832. Altec's number for this recall is MAB 716.
Recall campaignNHTSA 18V873000
- Component
- Exterior lighting: brake lights
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 156
- Reported to NHTSA
- 2018-12-07
- Owners notified
- 2019-02-07
Defect description
Altec Industries, Inc is recalling certain 2017-2018 Digger Derrick, Aerial Devices, and Service Body vehicles, equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such these vehicles fail to comply to with the requirements of Federal Motor Vehicle Safety Standard FMVSS 108, "Lamps, Reflective Devices, and Associated Equipment."
Safety risk
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Manufacturer remedy
Altec will notify owners, and dealers will replace the brake lights, free of charge. The recall began February 7, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 708.
Recall campaignNHTSA 18V792000
- Component
- Electrical system: wiring
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 186
- Reported to NHTSA
- 2018-11-09
- Owners notified
- 2019-01-09
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2018 AT37-G, AT40, AT37, AT41, AT48 and L37M Aerial Devices. The under-hood wiring on these vehicles may be damaged by sharp edges within the engine bay area.
Safety risk
Damaged wiring can increase the risk of a fire.
Manufacturer remedy
Altec will notify owners, and dealers will inspect the wiring, replacing any damaged protective loom and install an edge guard to the bracket area, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 704.
Recall campaignNHTSA 18V757000
- Component
- Structure
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 46
- Reported to NHTSA
- 2018-10-26
- Owners notified
- 2018-10-26
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2018 Altec DM45, DM47B, DC45 and DC47 Digger Derricks and TA50 and TA60 Aerial Devices. The high strength fasteners used to secure the pedestal to the turn table may fail.
Safety risk
If the fasteners fail, the pedestal may separate from the turn table, increasing the risk of injury.
Manufacturer remedy
Altec has notified owners, and dealers will inspect the fasteners, replacing them as necessary, free of charge. The recall began October 26, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 701.
Recall campaignNHTSA 18V706000
- Component
- Structure
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 1,592
- Reported to NHTSA
- 2018-10-09
- Owners notified
- 2018-12-03
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.
Safety risk
If the step separates from the platform, it can increase the risk of injury.
Manufacturer remedy
Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695.
Recall campaignNHTSA 18V617000
- Component
- Structure
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 39
- Reported to NHTSA
- 2018-09-12
- Owners notified
- 2018-09-21
Defect description
Altec Industries Inc. (Altec) is recalling certain 2018 Altec AC18, AC23, AC30, AC40, AC45 Cranes, D2045, DT65 Digger Derricks, and AA55 Aerial Devices. The rotation platform fasteners may have been overtightened, possibly resulting in the fasteners breaking.
Safety risk
If the fasteners break, the pedestal or turntable may separate from the vehicle, increasing the risk of injury.
Manufacturer remedy
Altec has notified owners, and the rotation bearing fasteners will be replaced, free of charge. The recall began on September 21, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 692.
Recall campaignNHTSA 18V552000
- Component
- Structure
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 530
- Reported to NHTSA
- 2018-08-22
- Owners notified
- 2018-10-19
Defect description
Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Safety risk
If the platform moves unexpectedly, it can increase the risk of injury.
Manufacturer remedy
Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin October 17, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 689.
Recall campaignNHTSA 18V553000
- Component
- Electrical system: wiring: fuses and circuit breakers
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 40
- Reported to NHTSA
- 2018-08-22
- Owners notified
- 2018-10-04
Defect description
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LS63 Aerial Devices. The fuse for the battery was not installed to the guidelines. The incorrectly placed fuse may increase the risk for an electrical short.
Safety risk
An electrical short can increase the risk of a fire.
Manufacturer remedy
Altec will notify owners, and dealers will inspect the battery fuse location, relocating it if necessary, free of charge. The recall is expected to begin October 15, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 691.
Recall campaignNHTSA 18V348000
- Component
- Trailer hitches
- Manufacturer
- Altec Industries Inc.
- Vehicles affected
- 201
- Reported to NHTSA
- 2018-05-29
- Owners notified
- 2018-07-25
Defect description
Altec Industries Inc. (Altec) is recalling certain 2012-2018 Altec LS63 and LS87 aerial devices equipped with a pintle hook mounted into the Class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Safety risk
An overloaded receiver tube could detach, increasing the risk of a crash.
Manufacturer remedy
Altec will notify owners, and provide them with a placard that states the limit of the receiver tube assembly as 600lbs vertical load, and 6,000lbs towing capacity, free of charge. The recall began on July 25, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 684.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.