Model year record
7 recall campaigns on file for this model year. No owner complaints on file.
THE ENTRANCE DOOR EMERGENCY RELEASE MECHANISM MAY EXCEED THE 20 LB. FORCE ALLOWED BY FMVSS 217.
BUSES WOULD NOT COMPLY WITH STANDARD.
REPAIR RELEASE CABLE MECHANISM TO COMPLY WITH STANDARD.
DUE TO INCREASED BULB LOAD ON THE FLASHER, WHEN OPERATED IN HAZARD MODE, FLASHER DID NOT MEET PERFORMANCE REQUIREMENTS OF FMVSS 108.
BUSES DO NOT COMPLY WITH FMVSS 108.
INSTALL A COMBINATION TURN HAZARD FLASHER THAT COMPLIES WITH STANDARD.
THE FLASHING MODE OF THE DECELERATION LIGHT SYSTEM IS NOT IN COMPLIANCE WITH FMVSS 108.
FLASHING DECELERATION LIGHTS MAY BE CONFUSING TO OTHERDRIVERS; BUSES DO NOT COMPLY WITH FMVSS 108.
MODIFY DECELERATION LIGHTS TO REMOVE THE FLASHING MODE.
ONLY TWO EMERGENCY WINDOW EXISTS WERE IDENTIFIED ON THE LEFT SIDE OF THE BUS, INSTEAD OF THREE REQUIRED BY FMVSS 217. CONSEQUENCE OF DEFECT: BUSES DO NOT COMPLY WITH FMVSS 217.
EMERGENCY EXIT INSTRUCTIONS WILL BE ADDED TO THE THIRD WINDOW ON THE LEFT SIDE TO IDENTIFY THIS WINDOW POSITION AS AN EMERGENCY EXIT.
CERTIFICATION LABELS CONTAIN ERRORS IN THE VIN CODE. ON SOME 1984 AND 1985 BUSES THE CHECK DIGIT CONTAINS A "DASH (-)" RATHER THAN THE REQUIRED NUMBER (8). ALSO ON SOME 1984 BUSES THE CODE FOR THE YEAR OF MANUFACTURER IS INCORRECT. THE TENTH DIGIT CONTAINS A "D" (1984) INSTEAD OF AN "E" (1985). CONSEQUENCE OF DEFECT: BUSES ARE NOT IN COMPLIANCE WITH FMVSS 115.
INSTALL A NEW CERTIFICATION LABEL WITH THE CORRECT VIN CODE WHERE THE CHECK DIGIT IS INCORRECT. ALSO NOTIFY THE OWNERS CONCERNING THE YEAR OF MANUFACTURER ERROR.
THE SAGINAW TILT STEERING COLUMN ASSEMBLY HAS TWO PIVOT BUSHINGS AND TWO MATING RETAINING BOLTS. THESE RETAINING BOLTS CAN LOOSEN, WHICH COULD ALLOW THE PIVOT BUSHINGS TO MOVE INTO THE TURNING ARC OF THE COLUMN SHAFT UNIVERSAL JOINT. CONSEQUENCE OF DEFECT: IF THE PIVOT BUSHINGS MOVE AND INTERFERS WITH UNIVERSAL JOINT OF THE COLUMN STEERING SHAFT IT CAN RESULT IN LOSS OF STEERING CONTROL AND AN ACCIDENT.
THE TWO PIVOT BUSHINGS WILL BE REMOVED, GREASED, AND REINSTALLED IN THE COLUMN HOUSING. A THREAD LOCKING COMPOUND WILL BE USED ON THE THREADS OF THE TWO PIVOT BUSHING RETAINING BOLTS. THE TWO EXTERNAL TOOTH SHAKEPROOF LOCKWASHERS WILL BE REPLACED WITH INTERNAL TOOTH SHAKEPROOF LOCKWASHERS. THE PIVOT BUSHING RETAINING BOLTS WILL BE INSTALLED TO A SPECIFIED TORQUE VALUE.
SOME BUSES MAY HAVE MISALIGNMENT OF THE STEERING COLUMN ASSEMBLY AND THE GEAR BOX.
REPLACEMENT OF THE LOWER JACKET TUBE BEARING, STEERING MOUNTING BRACKET, AND POSSIBLY THE WHEEL TUBE.
A complaint is one person's report to a federal agency. It is not a finding.
No complaints recorded for this model year.
Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.