Model year record

2012 MACK Pinnacle (CHU)

8 recall campaigns on file for this model year. No owner complaints on file.

Recalls

Recall campaignNHTSA 16V929000

Suspension: front: hub

Component
Suspension: front: hub
Manufacturer
Mack Trucks, Inc.
Vehicles affected
200
Reported to NHTSA
2016-12-23
Owners notified
2017-02-16

Defect description

Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.

Safety risk

Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.

Manufacturer remedy

Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.

Recall campaignNHTSA 16V099000

Power train: driveline: driveshaft

Component
Power train: driveline: driveshaft
Manufacturer
Mack Trucks, Inc.
Vehicles affected
33,981
Reported to NHTSA
2016-02-19
Owners notified
2016-06-07

Defect description

Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.

Safety risk

If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.

Manufacturer remedy

Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.

Recall campaignNHTSA 15V644000

Trailer hitches: fifth wheel assembly

Component
Trailer hitches: fifth wheel assembly
Manufacturer
Mack Trucks, Inc.
Vehicles affected
448
Reported to NHTSA
2015-10-13
Owners notified
2015-11-18

Defect description

Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.

Safety risk

If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.

Manufacturer remedy

Mack will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0395.

Recall campaignNHTSA 14V208000

Exterior lighting: turn signal: flasher unit

Component
Exterior lighting: turn signal: flasher unit
Manufacturer
Mack Trucks, Inc.
Vehicles affected
44,047
Reported to NHTSA
2014-04-18
Owners notified
2014-07-25

Defect description

Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.

Safety risk

A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.

Manufacturer remedy

Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.

Recall campaignNHTSA 14V078000

Electrical system

Component
Electrical system
Manufacturer
Mack Trucks, Inc.
Vehicles affected
70,208
Reported to NHTSA
2014-02-21
Owners notified
2014-04-24

Defect description

Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.

Safety risk

Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.

Manufacturer remedy

Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.

Recall campaignNHTSA 12V308000

Visibility: windshield wiper/washer: linkages

Component
Visibility: windshield wiper/washer: linkages
Manufacturer
MACK TRUCKS, INC
Vehicles affected
1,174
Reported to NHTSA
2012-07-02
Owners notified
2012-08-22

Defect description

MACK IS RECALLING CERTAIN MODEL YEAR 2012 CHU, CXU, AND GU VEHICLES, MANUFACTURED FROM OCTOBER 10, 2011, THROUGH NOVEMBER 17, 2011. HARDWARE USED TO SECURE THE WINDSHIELD WIPER LINKAGE TO THE WIPER MOTOR MAY NOT BE SUFFICIENTLY TORQUED, AND MAY CAUSE THE WINDSHIELD WIPER LINKAGE TO DETACH FROM THE WIPER MOTOR. AS A RESULT, THE WINDSHIELD WIPERS WILL NOT FUNCTION.

Safety risk

IF THIS OCCURS, UNDER CERTAIN DRIVING CONDITIONS THE DRIVER'S VISIBILITY WILL BE REDUCED, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

MACK WILL NOTIFY OWNERS, AND REPLACE THE HARDWARE ON AFFECTED VEHICLES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 22, 2012. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.

Recall campaignNHTSA 11V295000

Power train: driveline

Component
Power train: driveline
Manufacturer
MACK TRUCKS, INC
Vehicles affected
584
Reported to NHTSA
2011-05-20
Owners notified
2011-07-25

Defect description

MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2012, CHU, CXU, GU, MRU, LEU, AND TD TRUCKS EQUIPPED WITH A MERITOR DRIVELINE. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

Safety risk

THIS CAN RESULT IN SEAM WELD FRACTURE WHEN TORQUE IS APPLIED. ONCE THE TUBE SEAM WELD IS FRACTURED, THE DRIVELINE MAY BECOME INOPERABLE WHICH MAY RESULT IN A DISABLED VEHICLE OR DEBRIS FROM THE DRIVELINE MAY FALL ON THE ROADWAY, BOTH OF WHICH CAN INCREASE THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL REPLACE THE DRIVELINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 25, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.

Recall campaignNHTSA 11V272000

Service brakes, air: slack adjusters: automatic

Component
Service brakes, air: slack adjusters: automatic
Manufacturer
MACK TRUCKS, INC
Vehicles affected
1,524
Reported to NHTSA
2011-05-03
Owners notified
2011-08-12

Defect description

MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.

Safety risk

SLACK ADJUSTERS WITH THIS FLOW NOTCH COULD CRACK UNDER NORMAL BRAKING CONDITIONS CAUSING LOSS OF BRAKING WHICH COULD RESULT IN A VEHICLE CRASH.

Manufacturer remedy

MACK TRUCKS WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE SUBJECT SLACK ADJUSTERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 24, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.

Owner complaints

A complaint is one person's report to a federal agency. It is not a finding.

No complaints recorded for this model year.

Safety recall repairs are provided free of charge by franchised dealers, regardless of vehicle age or mileage. This page displays aggregated data for the model year. To check recall status for a specific vehicle, search its VIN at nhtsa.gov.